Forester STI – Dinitrol Protect Super 447 Anti Stonechip Coating

So the underside of the Forester has been cleaned, stripped of bits of trim and some suspension and anything I didn’t remove that I don’t want to spray has been masked. It’s finally time to start spraying the Dinitrol Protect Super 447 Anti Stonechip layer. But before I got started I took some pictures of […]

MX5 – New Supercharger Belt, Spark Plugs and Oil Change

Nothing too exciting but good to document. The belt I first got for driving the supercharger was the cheapest I could find at the time in case it was the wrong length. It had also had a pretty hard time in the early days of running the supercharger while I got the pulleys lined up […]

MX5 – Supercharger Build Finished

I think it might be finished or at least as finished as any project can be. I had a bit of a move around of gauges inside. I found having the wideband gauge low down a bit of a problem when trying to catch a look at it to keep an eye on fueling while […]

Garage ‘Multimedia Web Access Solution’

Well you’ve got to have some tunes on in the garage but being stuck with just a radio is a bit old fashioned and lacking in choice. I’ve also had old laptops available to get internet access in the garage for years as it can be so useful. So I thought I’d come up with […]

MX5 – DIY Wheel Alignment

(First posted on MX5 nutz forum in October 2015) Next thing on the list was 4 wheel alignment.  I like doing things myself if I can so I do it the old school way with string, well fishing line actually.  Having slightly stretched tyres and a bit of poke on the wheels makes this much […]

Evo VI – Engine Bay Clean

(First posted on MLR forum in July 2016) Firstly I gave the exterior a clean with my new birthday present. Then, for some reason I decided to look under the doors.  Yes, I cleaned the underneath of the doors. Now it’s time to clean the engine bay! Filth. There’s white paint behind there Getting there […]

Evo VI – More Engine Bay Tidying

(First posted on MLR forum in July 2016) Wing bolts always looked untidy so got some of these. Freshened up the inner wing paint with some of this. Bit of paint under the original washer to stop it rusting. More gold. Should help inlet temps a bit as both the pipes I’ve wrapped are the […]