With the Dinitrol Super Protect 447 applied, next I could deal with protecting the body shell and subframe cavities. I could also apply a layer of wax to the whole underside. There wouldn’t be much point in me putting in all this time and effort to protect the outer surfaces of the body shell and […]
So the underside of the Forester has been cleaned, stripped of bits of trim and some suspension and anything I didn’t remove that I don’t want to spray has been masked. It’s finally time to start spraying the Dinitrol Protect Super 447 Anti Stonechip layer. But before I got started I took some pictures of […]
When you’re spraying any kind of paint you can guarantee it will end up on everything, not just the bits you want to paint. It amazes me how many body shops haven’t figured this out given the number of cars I’ve seen that have had paintwork done and are covered in over spray. So when […]
After stripping down the underside and having gone looking for any areas that had any sign of the early stages of rust. Now the best thing to do was apply Hydrate 80 rust killer to prevent the surface rust becoming more than that in years to come. No point being shy with it. […]
After thoroughly cleaning the underside anywhere I could with a pressure washer and allowing everything to dry out. Now it was time to get the car up on the lift and start removing any plastic trims and some suspension parts that would make the job of spraying the protective coatings easier and more effective. This […]
Having done my research, decided on the best overall treatment for the underside of the Forester and now got all the various bits delivered. There was nothing left to do but get on with it. The first and very important part of the whole process was cleaning the underside properly. I started by using a […]
The main reason I wanted a newly or at least recently imported car was how clean and rust free they are underneath. When I looked at a few cars for sale, the ones that had been in the UK for years had started to look pretty ropey underneath with lots of areas of rust. Rust […]
Before I get into fitting this….. Yes I know it’s unnecessary and there’s nothing wrong with the OEM dump valve for the kind of boost the standard turbo is ever going to make. But a big part of the enjoyment of a car, certainly for me, is the noises it makes and turbocharged engines can […]
As far as I can tell car interiors almost never get cleaned properly. This car was no different. It wasn’t that it had been untouched, it was nice and clean looking in general, the problem was just when you look a bit harder and in the areas that collect dirt and never normally see the […]
I could see it was likely the front pads were going to need replacing before I bought the car and sure enough when I got the car home and gave it an all over inspection I found the previous owners had certainly got their money’s worth! I also measured the disc thickness to compare with […]