(First posted on MLR forum in October 2014) Jem and I thought we’d like to go away for our first anniversary and, as we did a driving holiday for our honeymoon, we figured another driving holiday would be great. We took my Scooby to Scotland a few years ago and always wanted to go back […]
evolution
Evo VI – Fitting the Walbro Fuel Pump
(First posted on MLR forum in June 2014) Time to fit the new bits I had a good read about fitting the fuel pump and obviously found that there are two ways of doing it. (If you’re not aware, the options are remove the tank or cut and rejoin pipes) So I read as many […]
Evo VI – Goodies for the Evo
(First posted on MLR forum in May 2014) I ordered some goodies Rear discs and pads, forge actuator, r-spec solenoid and walbro fuel pump. got the discs and pads on right away and a new decat pipe as the old one was a bit rusty and had started leaking on one of the joins, I […]
Evo VI – Squeal Squeak Rattle Clunk Thud. What was that???
(First posted on MLR forum in May 2014) I use my Evo every day for work and it’s been faultless until a few weeks ago when, on my way to work, the bottom pulley decided it would rather be in two separate parts! It made quite a thud as the outer part let go and […]
Evo VI – Front Lower Arm Super Pro Poly Bushes
(First posted on MLR forum in May 2014) While checking for any movement in the suspension, prior to MOT time, I noticed a small amount of movement in the pass’ side ball joint. I doubt it would have even been noticed in the MOT but that’s not the point really is it. These don’t come […]
Evo VI – New Evolution VI Boot Decal
(First posted on MLR forum in May 2014) the rear decal was a bit faded and grubby so I got a new one. the old one was a bit of a pig to remove then left loads of stick behind make sure i get it right… fresh and new
Evo VI – Boost Leak Check
(First posted on MLR forum in April 2014) Thought it’d be a good plan to do a boost leak check. So I machined up a bung to fit in the turbo inlet that would allow me to connect the compressor via a tyre valve. using some washing liquid in water i put it everywhere to […]
Evo VI – Ice Cold Evo
(First posted on MLR forum in March 2013) A few snaps I took during the snow
Evo VI – Evo Film
(First posted on MLR forum in March 2013) A mate and I made a short film over xmas to kill the boredom. It took ages to film and edit but we’re really happy with the result for our first attempt. A few snaps of us filming it
Evo VI – The Evo Gets Ribbons and Discs
(First posted on MLR forum in January 2013) some friends were getting married and hadn’t got a car planned as they were having a small do (the way they should be in my opinion 😀 ) so i offered to be chauffeur which my mate was well happy with so the evo got a quick […]