Having test fitted all the parts I fabricated to be sure I was happy with them (see here, here and here). The exhaust, exhaust heat shield and alternator heat shield could all be fitted for the last time with new gaskets and fixings. Everything ready to fit. New exhaust manifold gasket in place. Engine mount […]
k series elise
S1 Elise – Making an Alternator Heat Shield
Following on from the previous two posts about making an exhaust heat shield and wrapping the exhaust I wanted to give the alternator some protection too. The exhaust manifold is quite close to the alternator on K-Series engines. This is not a major problem with adequate heat shielding and good airflow to the alternator. The […]
S1 Elise – Making an Exhaust Heat Shield
As I’ve said previously, it got a bit hot in the Elise drivers seat on the hottest summer days and I wanted to do what I could to keep heat from the exhaust at bay. One thing being heat wrapping the exhaust which you can see here and the other being fitting a more effective […]
S1 Elise – 160 VVC / S2 Exhaust Manifold and MG ZR160 Downpipe
When I first got the Elise I found a number of exhaust leaks so spent some time replacing gaskets to sort them out. More about that here and here. While doing this I noticed the outer braiding of the flex section had started to break and the lambda sensor didn’t look great. Clearly someone had […]
S1 Elise – Fitting Poly Lower Rear Engine Mount Bushes
Having found the exhaust to be leaking at the join between the manifold and downpipe, when I first got the Elise, and noticed the flexi section underneath the sump had occasionally been touching the undertray. I figured the engine mounts might have got a bit tired after 20 years causing a bit more engine movement […]
S1 Elise – Suspension Refresh – Nitron Shocks Freshen Up
The Nitron Street Series, fitted to my Elise by a previous owner, are very well liked by Lotus owners for road use and they certainly feel pretty good to me. So as I only intend to use the Elise on the road and the dampers had only covered 11k miles I didn’t see any reason […]
S1 Elise – Suspension Refresh – Wishbones Surface Rust Removal
With the wishbones now bare I could get on to examining them and preparing them for the full POR15 treatment (why I chose this coating over other options I will explain later). I was pretty confident the wishbones were not suffering from any serious corrosion as my Elise is at fairly low mileage of 53k […]