(First posted on MLR forum in July 2015) These Evo’s are getting on a bit nowadays and rust can be a very serious problem for some of them. I’ve been under mine enough to know it’s not perfect but is certainly nowhere near as bad as some out there. So I really wanted to make […]
(First posted on MLR forum in July 2015) Another little job I did because it had been bugging me for a while. Dirt collected in the fuel filler flap and the flap wasn’t quite straight as the panel gaps were’t even all round. So I took it off. much better clean and now it has […]
(First posted on MLR forum in July 2015) After spending a while tweaking the ride height and camber of the new coilovers I thought I’d check the caster to make sure everything is as it should be. The mount for the camber caster gauge is magnetic so I made some steel plates and extended wheel […]
(First posted on MLR forum in July 2015) I’d thought for a little while there might be a bit much engine movement so I looked into ways of reducing the movement. I saw those top mounted engine torque dampers which are a nice shiny thing to stick in the engine bay but it seems most […]
(First posted on MLR forum in July 2015) After spending a while tweaking the ride height and camber of the new coilovers I thought I’d check the caster to make sure everything is as it should be. The mount for the camber caster gauge is magnetic so I made some steel plates and extended wheel […]
(First posted on MLR forum in March 2015) Before fitting I covered the threads in copper grease and wound the rings and perch up and down a few times then set the pretension on the springs. Covers fitted and adjusters protected from damage during fitting. One of the rear strut mounts. No major rust, just […]
(First posted on MLR forum in March 2015) I’d been thinking of changing the Tein coilovers for something different for a while as they always felt a bit ‘crashy’ and were pretty old. So I spent some time reading MLR and other forums about various options such as going back to original springs and dampers, […]
(First posted on MLR forum in March 2015) I did a quick freshen up and wax back in Dec. Started off as usual with the snowfoam. Then some fallout remover before a rinse and proper clean. Then it went in the garage so I could polish it. My wife’s Mini usually lives in there. This […]
(First posted on MLR forum in February 2015) The AYC pump. On some of the hottest days in 2013 my AYC light would come on but it was fine all winter then as summer 2014 kicked off it came on again a couple of times. After a quick read it seemed it was likely to […]
(First posted on MLR forum in October 2014) Jem and I thought we’d like to go away for our first anniversary and, as we did a driving holiday for our honeymoon, we figured another driving holiday would be great. We took my Scooby to Scotland a few years ago and always wanted to go back […]