(First posted on MX5 nutz forum in February 2016) The tensioner plate needed a bit of tweaking to get it sitting right so the belt didn’t want to run off the idle pulley but once I’d got that aligned right and was happy it would work I tidied it up a bit so it looks […]
boost
MX5 – Supercharger Bypass
(First posted on MX5 nutz forum in February 2016) I read that a hot side supercharger setup like I am building can suffer surge on overrun and that is remedied with the use of a bypass valve just as you will find on the original setup of these superchargers on the BMW Mini. It basically […]
Evo VI – Boost Leak Check
(First posted on MLR forum in April 2014) Thought it’d be a good plan to do a boost leak check. So I machined up a bung to fit in the turbo inlet that would allow me to connect the compressor via a tyre valve. using some washing liquid in water i put it everywhere to […]