There were a few little jobs that needed doing on Jem’s Mini that I’d been putting off but they’re much less of a chore now I have the lift so I was happy enough to get them done. This won’t do. Same the other side. Pair of replacements. Old boot off, joint cleaned out and […]
Author: Toby
2017 Masters Historic Racing at Brands Hatch
This has become a bit of an annual event as it’s always such a good day and decent value with use of the suite including food and drink all day. A few pics from this year. Great view of the start finish and a nice bit of tea and cake. Win! Plus the odd beer. […]
MX5 – Exedy Clutch Upgrade
As far as I knew the clutch in the MX5 was nothing special. It had clearly been replaced at some point but I had no idea what with or how long ago. So I knew there was a chance it might not be able to handle the additional torque the supercharger setup was going to […]
MX5 – Supercharger Overheating the Power Steering Fluid
Well this problem could probably have been predicted! The outlet of the supercharger is quite close to the power steering fluid reservoir and obviously the supercharger outlet gets quite hot so on a few occasions the power steering fluid overflowed a little, I assume just due to it expanding with the heat and it was […]
MX5 – New Supercharger Belt, Spark Plugs and Oil Change
Nothing too exciting but good to document. The belt I first got for driving the supercharger was the cheapest I could find at the time in case it was the wrong length. It had also had a pretty hard time in the early days of running the supercharger while I got the pulleys lined up […]
Jem’s Mini – Heater Matrix Water Leak
I got a lot of work done to Jem’s Mini a few years ago in replacing and repairing the inner and outer sills on both sides and welding some repairs in a couple of other areas but since then I’ve just done the bare minimum of a general check with the odd small job prior […]
Jem’s Mini – Roll Cage Fitting
We always wanted to put a roll cage in Jem’s Mini for a bit of additional safety and to improve the rigidity of the shell. But I couldn’t fit one to the car with the old sills in the rusty state they were, it would have been pointless. Well since I’d replaced the sills I […]
Jem’s Mini – Rustbuster Epoxy 121 Paint for the New Sills
When I replaced the sills and welded some repairs on Jem’s Mini a couple of years ago I just put a couple of layers of Hammerite black on but I always wanted to find something a bit better and more hard wearing. So a while back I did some research and found what looks like […]
MX5 – Supercharger Build Finished
I think it might be finished or at least as finished as any project can be. I had a bit of a move around of gauges inside. I found having the wideband gauge low down a bit of a problem when trying to catch a look at it to keep an eye on fueling while […]
Jem’s Mini – Plasti Dip Grille
Jem and I both really like the idea of having a complete carbon grille and headlight surrounds on her Mini which wasn’t even an option when we fitted carbon bumpers and arches over 10 years ago but now you can get more carbon bits for Mini’s than ever before. The only problem is the carbon […]









