MX5 – Supercharger Fitting Finished

(First posted on MX5 nutz forum in February 2016) Got some of the gold heat tape stuff. I also lowered the exhaust heat shield I’d made ages ago so it can stay fitted with the charger on.  I will probably add to the heat shielding or rethink it entirely if I need to but this […]

Garage ‘Multimedia Web Access Solution’

Well you’ve got to have some tunes on in the garage but being stuck with just a radio is a bit old fashioned and lacking in choice. I’ve also had old laptops available to get internet access in the garage for years as it can be so useful. So I thought I’d come up with […]

MX5 – Falken ZE914 Tyres All Round

(First posted on MX5 nutz forum in January 2016) Jem and I planned a holiday around Cornwall for the beginning of October but had to postpone it until December.  I took the opportunity to replace all the tyres with something a bit better than the ones it had, especially considering the few days in Cornwall, […]

MX5 – DIY Wheel Alignment

(First posted on MX5 nutz forum in October 2015) Next thing on the list was 4 wheel alignment.  I like doing things myself if I can so I do it the old school way with string, well fishing line actually.  Having slightly stretched tyres and a bit of poke on the wheels makes this much […]

Evo VI – Turbosmart Dual Port Dump Valve / BOV

When I bought the Evo it came with an HKS SSQV dump valve, fitted by a previous owner.  Not something I would have chosen to fit myself as fully venting to atmosphere has it’s problems with the Evo using a MAF sensor.  But they are a good dump valve mechanically, it didn’t leak, it made […]

MX5 – Gearbox, Turret and Diff Oils

(First posted on MX5 nutz forum in July 2015) Got myself all the oils for the gearbox, turret and diff.  The cost of all the oils for the MX5 is a third of the cost of doing all the Evo oils!  This Mazda gets more and more appealing.   Turret first.  Got a new boot […]

Evo VI – Engine Bay Clean

(First posted on MLR forum in July 2016) Firstly I gave the exterior a clean with my new birthday present. Then, for some reason I decided to look under the doors.  Yes, I cleaned the underneath of the doors. Now it’s time to clean the engine bay! Filth. There’s white paint behind there Getting there […]

Evo VI – More Engine Bay Tidying

(First posted on MLR forum in July 2016) Wing bolts always looked untidy so got some of these. Freshened up the inner wing paint with some of this. Bit of paint under the original washer to stop it rusting. More gold. Should help inlet temps a bit as both the pipes I’ve wrapped are the […]